A Code of Practice for the safe installation, operation and maintenance of Thermal Spraying Equipment

 
Introduction | Preface | Contents | Acknowledgements | Issue Details | TSSEA Home Page


11. References

  1. Essentials of Health and Safety at Work, ISBN 0 7176 0716 X.
  2. Management of Health and Safety at Work Regulations 1999 and ACOP, L21, ISBN 0 7176 2488 9.
  3. Five steps to risk assessment, INDG163 (rev). Single free copies are available to download from the HSE website, priced packs of 10: ISBN 0 7176 1565 0.
  4. Five steps to risk assessment, Case Studies HSG 183, ISBN 0 7176 1580 4.
  5. Safe Use of Work Equipment. Provision and Use of Work Equipment Regulations 1998, L22, ISBN 0 7176 1626 6.
  6. Manual Handling. Manual Handling Operations Regulations 1992, as amended, L23, ISBN 0 7176 2823 X.
  7. Safe use of lifting equipment. Lifting Operations and Lifting Equipment Regulations 1998, L113, ISBN 0 7176 1628 2.
  8. Workplace health, safety and welfare. Workplace (Health, Safety and Welfare) Regulations 1992, L24, ISBN 0 7176 0413 6.
  9. Control of Noise at Work Regulations; Controlling Noise at work. Guidance on the Regulations L108, ISBN 0 7176 6164 4.
  10. Control of Substances Hazardous to Health Regulations 2002, as amended; Approved code of practice and guidance, L5, ISBN 0 7176 2981 3.
  11. Dangerous Substances and Explosive Atmospheres Regulations, 2002, Approved Code of Practice and Guidance, L138, ISBN 0 7176 2203 7.
  12. Regulatory Reform (Fire Safety) Order 2005, SI 2005/1541.
  13. Electricity at Work Regulations, 1989, Memorandum of Guidance, Second edition 2007, HSR25, ISBN 0 7176 6228 9.
  14. Environmental Protection Act 1990.
  15. Occupational Exposure Limits, Guidance Note EH 40, published annually.
  16. Asthmagen? Critical assessments of the evidence for agents implicated in occupational asthma. Also known as the 'Asthmagen Compendium'; currently available as a free download from the HSE website:http://www.hse.gov.uk/asthma/asthmagen.pdf
  17. Legionnaires Disease: The control of Legionella bacteria in water systems L8, ISBN 0 7176 1772 6.
  18. BS EN 60079-10: 2003. Electrical apparatus for explosive gas atmospheres part 10: Classification of hazardous areas.
  19. BS EN 50281-1-1 and -1-2 and BS EN 50281-1-3 Electrical apparatus for use in the presence of combustible dust.
  20. Product Standards - Machinery: Guidance Notes on UK Regulations. Available from the DTI see the publications section on the website: http://www.berr.gov.uk/
  21. BS EN ISO 12100 Parts 1 & 2: 2003, Safety of Machinery - Basic concepts, general principles for design (supersedes BS EN 292).
  22. BS EN 953: 1998. Safety of machinery - guards - general requirements for the design and construction of fixed and movable guards.
  23. BS EN 1088: 1996, plus A1: 2007. Safety of machinery - interlocking devices associated with guards - principles for design and selection.
  24. BS EN ISO 14121-1:2007. Safety of machinery - risk assessment principles (supersedes BS EN 1050).
  25. BS EN 60204-1: 2006. Safety of machinery - electrical equipment of machines - Part 1: general requirements.
  26. BS EN 125: 1991 Specification for flame supervision devices for gas burning appliances, thermo electric types.
  27. BS EN 161: 2002 Automatic shut off valves for gas burners and gas appliances.
  28. BS EN ISO 13850: 2006 Safety of machinery - emergency stop equipment: principles for design (supersedes BS EN 418).
  29. BS EN 954-1: 1997. Safety of machinery. Safety related parts of control systems. General principles for design.
  30. Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations 1996.
  31. Fire Safety: an employers guide ISBN 011 341229 0.
  32. British Compressed Gases Association Guidance Note 2: Safe Practice for the Storage of Gases in transportable Cylinders Intended for Industrial Use: Rev. 3, 2005.
  33. The Pressure Systems Safety Regulations, 2000, L122, ISBN 0 7176 1767.
  34. The safe use of oxy-fuel gas equipment (individual portable or mobile cylinder supply), British Compressed Gases Association publication CP7, Rev. 4 2004.
  35. Industrial gas cylinder manifolds and distribution pipework/pipelines (excluding acetylene), British Compressed Gases Association publication CP4, Rev. 3, 2005.
  36. The safe use of acetylene in the pressure range 0 to 1.5 bar, British Compressed Gases Association publication CP6, Rev. 1 1998.
  37. The design and construction of manifolds using acetylene gas from 1.5 bar to a maximum working pressure of 25 bar, British Compressed Gases Association publication CP5.
  38. The carriage of dangerous goods (classification, packaging and labelling) and use of transportable pressure receptacles regulations, 1996, L88, ISBN 0 7176 1221.
  39. Explosives Act, certificate of exemption 2, 1989.
  40. Safety in pressure testing, GS4 ISBN 0 7176 16290.
  41. BS EN 559: 2003, Gas Welding Equipment: Rubber hoses for welding, cutting and allied processes.
  42. BS EN 1256: 2006, Gas welding equipment - specification for hose assemblies for equipment for welding, cutting and allied processes.
  43. Personal Protective Equipment at work 1992, Second edition, L25, ISBN 0 7176 6139 3.
  44. Secretary of State's Guidance - Metal and Other Thermal Spraying Processes PG6/35 1996, ISBN 0 11 753281 9.
  45. BS EN 1598: 1998 Health and safety in welding and allied processes. Transparent curtains, strips and screens for arc welding processes.
  46. IRPA/INIRC Guidelines on limits of exposure to ultraviolet radiation of wavelengths between 180 nm and 400 nm incoherent optical radiation.
  47. IRPA Guidelines on protection against non-ionising radiation; the collected publications of the IRPA non-ionising radiation committee, McGraw Hill 1991, ISBN 00803 60971.
  48. American Conference of Governmental Industrial Hygienists, 'Threshold limit values for Chemical Substances and Physical Agents' (re-issued annually - always use the latest version.)
  49. Industrial Robot Safety 2000, HSG 43, ISBN 0 7176 1310 0.
  50. BS 7671: 2008, Requirements for electrical installations; IEE Wiring Regulations, 17th Edition.
  51. BS EN 60079-14: 2003 Electrical apparatus for explosive gas atmospheres. Electrical installations for hazardous areas (other than mines).
  52. PD60079-14: 2000, Guide to application of EN 60079-14 (now withdrawn)
  53. BS EN 60529:1992 Specification for degrees of protection provided by enclosures (IP code).
  54. BS EN 61508 series. Functional safety of electrical, electronic/programmable electronic safety-related systems.
  55. BS EN ISO 14918: 1998 Approval testing of thermal sprayers.
  56. Application of the manual handling operations regulations to gas cylinders, British Compressed Gases Association publication GN3, Rev. 1 2005.
  57. BS EN 169: 2002, Personal eye protection - filters for welding and related techniques; transmittance requirements and recommended use.
  58. BS EN 12021: 1999, Respiratory protective devices - compressed air for breathing apparatus (supersedes BS 4275).
  59. Electricity at work: safe working practices HSG 85, ISBN 0 7176 2164 2.
  60. BS EN 60079-17: 2007 Electrical apparatus for explosive gas atmospheres. Inspection and maintenance of electrical installations in hazardous areas (other than mines).
  61. Maintaining portable and transportable electrical equipment HSG 107, ISBN 0 7176 2805 1.
  62. Code of Practice for In-service Inspection and Testing of Electrical Equipment, Institution for Engineering and technology, 2001, ISBN 085296 7764.

The website for the HSE is http://www.hse.gov.uk/index.htm.

HSE publications are available from HSE Books, PO Box 1999, Sudbury Suffolk, CO10 2WA (tel 01787 881165). http://www.hsebooks.com/Books/

British Compressed Gases Association publications are available from 14 Tollgate, Eastleigh, Hampshire SO53 3TG, telephone 023 8064 1488 http://www.bcga.co.uk/

British Standards are available from British Standards Institution, 389 Chiswick High Road, London W4 4AL (tel 020 8996 7400). http://www.bsi-global.com/en/

 

© Copyright 2015 TSSEA